6 fibre optic hdtv camera interconnection system 3k.93c series with code (w) keyway a new range of high pe r fo r mance fib r e optic camera connectors have been developed to meet the needs of the new generation of digital tv cameras. the use of fibre optics means that transmission can be made over much longer distances using digital signals from the camera to the base station and at a much higher level of defin i - tion. howeve r , the pe r fo r mance of the inte r connection is critical if this benefit is to be fully exploited. C push-pull self-latching system for quick & easy mating C compact design with: 2 fibres, 2 power contacts and 2 signal contacts C v ery low optical losses (< 0.33 db) C t ested to the requirements of iec 874-1 C easy cleaning of fibre optic contacts C reliable design for outdoor application C sealed for environmental protection (i p 67) C unique 5 keys (code w) system allowing smooth and blind mating C u l 498 recognition C in-line connectors for chaining of cables C pre-terminated cables available C w orld-wide product support general characteristics caractristiques gnrales cable r etention fo r ce fo r ce de rtention du cable > 1000 n endurance endurance 10000 cycles d r op test t est la chute 2 m shock t enue aux chocs 100 g, 10-50 ms v ibration t enue aux vibrations 7 cycles (20-2000hz) t emperatu r e t empratu r e -40 c, +80 c t emperatu r e cycling cycle de tempratu r e -55 c, +90 c humidity humidit up to 95% at 60 c w ater r esistance etanchit depth of 1.8 m for 48 hours cor r osion cor r osion 48 hours, 5% salt water test t echnical characteristics / fibre optic contacts caractristiques techniques / contact fibre optique number of contacts nomb r e de contacts 2 t ype of contact t ype de contact f2 fib r e co r e/cladding ? ? fib r e c?ur/manteau s.m. 9/125 m ferrule bo r e inside ? ? de passage ferrule 126 m 4) mean inse r tion loss pe r te dinse r tion moyenn e 0.33 db 1) retu r n loss pe r te en r etour < -45 db 2) , < -28 db 3) 1) tested at 1300 nm in accordance with iec 874-1 method 7. 2) super pc machine polishing. 3) hand polishing. 4) other ferrule bo r e ? available 1) test 1300 nm selon cei 874-1 mthode 7 2) polissage la machine (super pc) 3) polissage la main 4) aut r es diamt r e de ferrule disponible 31.7 ?2 ?4.4 pa r t number rf r ence ffs.f2.bb2.lct10 ffs.f2.bb2.lce30 ph w , pe w , pbw ed w , en w , ebw ff s male f2 fibre optic contact ff s contact fibre optique male type f2 ps s female f2 fibre optic contact ps s contact fibre optique femelle type f2 11.6 31.7 ?2 ?4.4 for models pour modles
fbw.3k.93c.clm m l s 1 ? 19 part number rfrence fgw.3k.93c.clmt90z fgw.3k.93c.clmt96z fgw.3k.93c.clmt12z 1 2-4 3 part number rfrence weight masse (g) ebw.3k.93c.clc 47 part number rfrence weight masse (g) edw.3k.93c.clc 47 part number rfrence fmw.3k.93c.clmt90z fmw.3k.93c.clmt96z part number rfrence weight masse (g) fgw straight plug with key (code w), cable adapter and nut for fitting a strain relief fgw fiche droite avec dtrompage (w), adaptateur de cable et poulet prvu pour manchon fbw straight plug with round flange (4 holes fixing), key (code w) fbw fiche droite platine ronde (fixation par vis), avec dtrompage (w) fmw straight plug with round flange (4 holes fixing), key (code w), cable adapter, nut for fitting a strain relief fmw fiche droite platine ronde (fixa- tion par vis), avec dtrompage (w), adaptateur de cable et poulet prvu pour manchon ebw fixed socket with front square flange (4 holes fixing), key (code w) ebw embase droite flasque carre avant (fixation par vis), avec dtrompage (w) fgw 20.6 ~61 ~31 10 ? 38 ? 20 s 15 ? 3.4 fbw ? 101 ? 71 10 ? 38 ? b s 15 fmw 29 42.5 6 3 ? 23 23 ? 3.4 ? 23 ebw 29 42.5 22.5 3 ? 23 ? 18 23 ? 3.4 edw cable gr. gr. de cable 101 81 15 101 81 15 135 115 20 dim. (mm) lms1 120 edw fixed socket with rear square flange (4 holes fixing), key (code w), and earthing tag edw embase droite flasque carre arrire (fixation par vis), avec dtrompage (w) et drapeau
|
